Rotary Tiller Reduce Labor Intensity

- Sep 20, 2017 -

Rotary Tiller Reduce labor intensity

Rotary tillage fertilization and seeding machine is a combination of traditional rotary tillers, planters and other work together with the agricultural operations together, can be completed once the land preparation, planting, ridge, fertilization, casing and repression and other work processes, It can reduce the labor intensity, grab agriculture, reduce the number of operations, soil moisture has an important role, can be widely applied to wheat, corn, peanuts, soybeans and other crops. However, due to the composite operation, so the supporting tractor power performance made a better request, has adapted to this change. At the same time, the power transmission of the unit itself will become complicated. No tillage is not no farming, but as little as possible, so the rotary tillage part compared with the traditional rotary tiller, there will be a lot of improvement, when the high-speed crop for the main purpose. Therefore, the power transfer and rotary tillage will be an important two parts of the rotary tillage fertilizing and sowing machine, which have a great impact on the effect of the whole machine.

The rotary tiller is a tractor that drives the rotary tiller to complete the tillage, rake, and land preparation. It can mix the vegetation and mix it into the whole tillage layer. It can also mix the chemical fertilizer, pesticide, etc. in the tillage layer The After the rotary tillage operation, the soil is smooth and the surface is smooth and the operation process is reduced, so it is widely used.

 Use before installation

 1, the installation and wheeled tractor supporting the three-point hanging rotary tiller, you should first cut off the power output shaft power, remove the output shaft cover, reversing and hooking a good rotary tiller, and then with the square Universal joint into the rotary tiller drive shaft, lift the rotary tiller, hand turn the knife shaft to see whether the operation is flexible, and then set the square with the universal joint into the tractor power output shaft fixed. Installation should pay attention to: the square shaft and square sleeve fork should be in the same plane, if installed wrong, universal joints will sound, rotary tiller vibration increases, and can damage the parts. After the universal joint is installed, insert the safety plug into the groove on the spline shaft and insert it with the cotter pin.

 2, the installation and tractor supporting the rotary tiller, the tractor should be tilted forward, remove the traction box, with five studs to the rotary tiller fixed in the gearbox. Note that the two pins on the two union surfaces should be aligned to ensure proper engagement of the gears after assembly. If the gears in the gearbox of the rotary tiller are connected to the gears in the gearbox, they can not be hard pressed and hardened. The pulley should be tilted and the gears in the gearbox should be rotated at an angle. In addition, it should be guaranteed that the thickness of the pad at the connection to the gearbox is 0.45 to 0.55 mm, which is too thick or too thin to affect the meshing clearance of the two meshing gears. When removing the rotary tiller, use the cover to cover the gearbox with the cover to prevent the debris from falling into the box.

  • Heavy Duty 83hp,84hp,85 Hp 60 Blades Rotary Tiller ,otovator
  • Heavy Duty 66hp,67hp,68 Hp ,44 Blades Rotary Tiller,rotary Hole
  • Heavy Duty 63hp,64hp,65 Hp Rotary Tiller,66 Blades Rotovator Rotary Tiller
  • Medium Duty 36hp,37hp,38 Hp ,3 Point Hitch Rotovator,farm Rotovator
  • Light Merry 30hp,31hp,32 Hp ,28 Blades Tractor Mounted Rotary Tiller
  • Mini Power 21hp, 22hp, 23hp, Light 3 Point Tillers,rotary Tiller

Related Products