Rotary Tiller How To Use It Efficiently?

- May 26, 2017 -

How efficient use of Rotary Tiller?

Any kind of thing has the correct use of the method, Rotary Tiller is no exception, his use and did not imagine so simple, then how efficient use of Rotary Tiller? Here we come to solve this problem.

First of all, to understand his role, simply to plow the plots and then rake again, and occasionally also used as a paddy plow or paddy field rake use, can be used directly for non-operating paddy fields, convenient and quick. Based on years of sales and experience, we have summarized three more practical farming methods to improve the efficiency of the Rotary Tiller.

First, the shuttle method. From one side of the plot began to farming, from a bow to another head, and then turn the direction, next to the plow of the plots to continue farming, in accordance with this law, until the end of farming. The advantage of this method is that the empty travel is less, the same time to complete the work more, the disadvantage is more turning, easy to damage the device.

Second, the method of farming. The whole farming process was spiral, from the plot around the center of the expansion, the circle is getting smaller and smaller, and finally to the center of the circle, and some did not till the last must be made up, do not stay dead. This method is worth promoting, the plowed plots look very flat, suitable for paddy field operations.

Three, sets of farming method. The plot is divided into a number of areas, each area set work, this method is more suitable for larger square block, not recommended to choose.

So how much do you know about some of the tips of the Rotary Tiller?

1. At the beginning of the operation, the Rotary Tiller should be lifted, first combined with the power output shaft, the knife shaft speed to the rated speed, and then down the Rotary Tiller, so that the blade gradually into the required depth. It is strictly forbidden to insert the blade into the power output shaft or the sharp descending Rotary Tiller to avoid causing the blade to bend or break and to increase the load of the tractor.

2. In the operation, should be as low as possible slow, so that can guarantee the quality of operations, so that the soil crushed, but also reduce the wear and tear of the parts. Pay attention to listen to the Rotary Tiller whether there is noise or metal percussion, and observe the broken soil, till the deep situation. If there is any abnormality, it should be shut down immediately for inspection, and then the operation can be continued.

3. When the ground turns, prohibit the operation, the Rotary Tiller should be raised, so that the blade away from the ground, and reduce the tractor throttle, so as not to damage the blade. When lifting the Rotary Tiller, the inclination angle of the universal joint should be less than 30 degrees. If it is too large, it will cause the impact noise to be prematurely worn or damaged.

4. In the reverse, over the ridge and transfer the land, the Rotary Tiller should be raised to the highest position, and cut off the power, so as not to damage the parts. Such as the distant transfer, use a locking device to fix the Rotary Tiller.

5. After each shift, the Rotary Tiller should be serviced. Remove the soil and weeds on the blade, check the fastening of the connectors, add lubricating oil to the lubricating oil, and add butter to the joints to prevent aggravating wear.


  • Heavy Duty 77hp,78hp,79hp,80 Hp ,60 Blades Rotary Tiller
  • Heavy Duty 63hp,64hp,65 Hp Rotary Tiller,66 Blades Rotovator Rotary Tiller
  • 51hp,52hp,53 Horsepower ,48 Blades Rotary Tiller,tractor Machted
  • Medium Type 48hp,49hp,50 Hp Rotary Tiller,medium Size Farm Use Rotary Tiller
  • Tractor Mounted 33hp,34hp,35 Hp Rotary Tiller for Agriculture,side Drive Rotary Tiller
  • Pto Drive 27hp,28hp,29 Hp ,gear Drive Rotary Tiller ,agricultural Rotovator

Related Products