Rotary Tiller Classification Criteria

- Oct 23, 2017 -

Rotary Tiller Classification criteria

Rotary tillage machine as a new agricultural modernization of agricultural tools, the current farmers have been the use of the majority of farmers. As a tool for the use of mechanized agriculture, it makes up for the shortcomings of traditional agriculture, greatly reducing the workload of farmers, bringing a high economic efficiency.

Rotary tillage machines can be classified into different types according to different classification criteria. In terms of the power transmission lines of the rotary tiller, they can be divided into intermediate drive and side drive. The middle drive structure is simple and easy to use, but its lack of the middle may be wrapped around the grass; side drive type structure is relatively complex, but its adaptability is strong, for the paddy field operation in terms of its unparalleled superiority. According to the structure of the rotary tiller, it can be divided into round beam type and frame type. The rotary drum machine is developed earlier and the technology is relatively perfect. The frame type rotary tiller has a complicated structure and has strong rigidity and good stability. The According to the location of the rotary knife shaft can be divided into horizontal axis (horizontal) and vertical axis (vertical), horizontal axis of the rotary tiller strong energy, so the work efficiency is high, can be busy in the busy season for farmers to fight for the best , But for the energy consumption is also large; vertical axis rotary tiller for rice farming, and its horizontal axis has a strong role in the earth, but its coverage is relatively weak. Each machine in use will inevitably fail, encountered these failures should be how to exclude and check it? Understand its failure to find better measures, today we are on the rotary tiller often appear a few failures to do some analysis.

First, the machine load is too large. It is understood that the phenomenon of rotary tillage machine is mainly caused by three reasons. First, that is, deep tillage; second, the soil dry and hard; third, the speed is too fast. Staff can be improved by means of research and exclusion by reducing tillage, slowing forward speed and tool roll speed, changing low speed and so on.

Second, the universal joint is too large to offset the problem. The main cause of this problem is two aspects. On the one hand, it is caused by the inconsistency of the rotary tiller. On the other hand, it is caused by the short side of the tractor's left and right limit chain.

Third, the knife shaft does not move the problem. Causing the knife shaft to turn the problem is multifaceted, including the knife shaft knitting, gear or bearing damage, killing, bevel gear no side clearance, knife shaft bending deformation and other reasons. Users can adjust for different reasons, the appropriate adjustments. Not only that, the staff can regularly carry out the replacement of bearings, adjust the axis of concentricity and so on.


  • Heavy 106hp ,107hp, 108hp, 109hp,110 Hp Rotary Tiller ,rotary Hole
  • Heavy Duty 101hp, 102hp, 103hp, 104hp,105 Hp Rotary Tiller,rotovator
  • Medium Duty 57hp,58hp,59 Hp ,3 Point Rotary Tiller , Rototiller
  • 51hp,52hp,53 Horsepower ,48 Blades Rotary Tiller,tractor Machted
  • Medium Deep 45hp,46hp,47 Hp ,3 Point Side Drive Rotary Hole
  • Light Merry 30hp,31hp,32 Hp ,28 Blades Tractor Mounted Rotary Tiller

Related Products