Rotary Tiller After The Rotary Tillage Operation

- Aug 03, 2017 -

Rotary Tiller After the rotary tillage operation

The rotary tiller is a tractor that drives the rotary tiller to complete the tillage, rake, and land preparation. It can mix the vegetation and mix it into the whole tillage layer. It can also mix fertilizer, pesticide, etc. in the tillage layer The After the rotary tillage operation, the soil is smooth and the surface is smooth and the operation process is reduced, so it is widely used.

 Use before installation

 1, the installation and wheeled tractor supporting the three-point hanging rotary tiller, you should first cut off the power output shaft power, remove the output shaft cover, reversing and hooking a good rotary tiller, and then with the square Universal joint into the rotary tiller drive shaft, lift the rotary tiller, hand knife axis to see whether the operation is flexible, and then set the square with the universal joint into the tractor power output shaft fixed. Installation should pay attention to: the square shaft and square sleeve fork should be in the same plane, if installed wrong, universal joints will sound, rotary tiller vibration increases, and can damage the parts. After the universal joint is installed, insert the safety pin into the groove on the spline shaft and insert it with the cotter pin.

 2, the installation and tractor supporting the rotary tiller, the tractor should be tilted forward, remove the traction box, with five studs to the rotary tiller fixed on the gearbox. Note that the two pins on the two union surfaces should be aligned to ensure proper engagement of the gears after assembly. If the gears in the gearbox of the rotary tiller gear are connected with the gears in the gearbox, they can not be hard pressed and hardened. The pulley should be tilted and the gears in the gearbox should be rotated at an angle. In addition, it should be guaranteed that the thickness of the pad at the connection to the gearbox is 0.45 to 0.55 mm, which is too thick or too thin to affect the meshing clearance of the two meshing gears. When removing the rotary tiller, use the shroud to cover the gearbox to prevent the debris from falling into the box. Large spiral and small screw rotary tiller difference: large spiral and small screw rotary tiller compared to the gap between the adjacent knife is relatively large, and the number and size of the blade are relatively large.

The rotary tiller is a farming machine that is equipped with a tractor to complete the tillage and rake operations. Because of its strong ability to break the soil, after the flat surface and other characteristics, and has been widely used; at the same time can be cut under the surface of the root stubble, easy to sowing operations for the late planting to provide a good seed bed. Proper use and adjustment of the rotary tiller is important to maintain its good technical condition and to ensure the quality of farming. Mainly used for rice fields and vegetable fields, also known as rotary tillers, a job that can make the soil crushing, and can make full use of the power of tractors, ground leveling. Horizontal horizontal axis of the horizontal axis of the rotary tiller more applications, weed coverage is poor, soil and fertilizer mixed evenly, but also for orchard farming, improve work efficiency, shallow tillage (dry farming 12 to 16 cm But on stubble, swamp and grass wasteland.


  • Heavy Duty 83hp,84hp,85 Hp 60 Blades Rotary Tiller ,otovator
  • Heavy Duty Agricultural Equipment 72hp, 73hp, 74hp, 75hp,76 Hp Rotary Tiller
  • Medium Type 48hp,49hp,50 Hp Rotary Tiller,medium Size Farm Use Rotary Tiller
  • Tractor Mounted 33hp,34hp,35 Hp Rotary Tiller for Agriculture,side Drive Rotary Tiller
  • Light Merry 30hp,31hp,32 Hp ,28 Blades Tractor Mounted Rotary Tiller
  • Pto Drive 27hp,28hp,29 Hp ,gear Drive Rotary Tiller ,agricultural Rotovator

Related Products