Light Duty Rotary Tiller Principle Of Maintenance

- Aug 29, 2017 -

Light Duty Rotary Tiller Principle of maintenance

The troubleshooting method of the light rotary tiller

1. The clutch shall be repaired or replaced in time when the gear is bald. In the repair time, carbon brazing rod is used to weld mesh teeth, and then the standard tooth indentation is used for welding and finishing, and the heat treatment is done according to the regulations.

2. Replace the spring with small or broken spring with standard spring to ensure sufficient positioning stability and reliability of meshing sleeve.

3. If the groove of the meshing sleeve is overworn, it should be repaired or replaced.

4. The pitch and the ball head of the joystick can be repaired when the ball head is worn out, and the heat treatment is done by hand finishing. Replacement of new parts cannot be repaired.

8. Correct maintenance of light rotary cultivator

The principle of "anti - cure and reconditioning" is the principle of use maintenance of light rotary cultivator. The maintenance of light rotary cultivator is divided into class maintenance and quarterly maintenance.

1. Maintenance should be carried out after each shift, including:

Check and tighten the connection bolts; (2) check the defects of such vulnerable parts, such as bolt and cotter, and replace them when necessary; Check the gearbox, 10 bytes and bearing whether the oil is short of oil and should be added immediately if necessary.

2. Quarterly maintenance should be made after the quarterly completion of each job, including:

Thoroughly remove dust and oil from machine tools; Replace lubricant and grease thoroughly; Check the blade for excessive wear and replace if necessary; Check the hood, drag board and other deformation, restore its original shape or change; To inspect the appearance of the machine, apply paint, oil and rust on the curved knife and spline shaft. When not in use for a long time, the wheeled tractor supporting light rotary cultivator should be placed on the horizontal ground, and should not be suspended on the tractor.


  • Heavy 116hp,117hp,118 Hp ,72 Blades Rotary Tiller,equipment Tillers
  • Heavy Duty 101hp, 102hp, 103hp, 104hp,105 Hp Rotary Tiller,rotovator
  • Heavy Duty 96hp, 97hp, 98hp, 99hp,100 Hp Rotary Tiller ,tractor Rotovator
  • Heavy Duty 83hp,84hp,85 Hp 60 Blades Rotary Tiller ,otovator
  • Medium Deep 45hp,46hp,47 Hp ,3 Point Side Drive Rotary Hole
  • Medium Power Farm 39hp, 40hp, 41 Hp ,tractor-mounted Tillers

Related Products