Heavy Duty Rotary Tiller In A State Of Ascension

- Aug 03, 2017 -

Heavy Duty Rotary Tiller In a state of ascension

The use of heavy-duty rotary tiller tips

1. At the beginning of the operation, the heavy-duty rotary tiller should be lifted, combined with the power output shaft, the tool shaft speed to the rated speed, and then down the heavy rotary tiller, so that the blade gradually into the required depth. It is strictly forbidden to insert the blade into the power output shaft or drastically drop the heavy-duty rotary tiller to avoid causing the blade to bend or break and aggravate the load of the tractor.

2. In the operation, should be as low as possible slow, so that can guarantee the quality of operations, so that the soil crushed, but also reduce the wear and tear of the parts. Pay attention to listen to heavy-duty rotary tiller whether there is noise or metal percussion, and observe the soil, till the deep situation. If there is any abnormality, it should be shut down immediately for inspection, and then the operation can be continued.

3. When turning on the ground, prohibit the operation, the heavy rotary tiller should be raised, so that the blade from the ground, and reduce the tractor throttle, so as not to damage the blade. When lifting a heavy rotary tiller, the inclination angle of the universal joint should be less than 30 degrees. If it is too large, it will cause the impact noise to be prematurely worn or damaged.

4. In the reverse, over the ridge and transfer the land, the heavy rotary tiller should be raised to the highest position, and cut off the power, so as not to damage the parts. If you move to a distance, use a locking device to secure the heavy rotary tiller.

5. After each shift operation, should be heavy duty rotary tiller for maintenance. Remove the soil and weeds on the blade, check the fastening of the connectors, add lubricating oil to the lubricating oil, and add butter to the joints to prevent aggravating wear.

Heavy-duty rotary tiller When used in conjunction with a tractor equipped with a large-scale adjustment hydraulic suspension mechanism, the steps and precautions for the suspension mechanism are: When the rotary adjustment is used, the adjustment of the use force is prohibited and the force adjustment handle must be placed in the " The position of the heavy rotary tiller, the position adjustment handle moves forward and backward, whereas the heavy rotary tiller rises; when the heavy-duty rotary tiller reaches the required tillage, the position hand is blocked by the positioning hand wheel to facilitate heavy The rotary tiller drops to the same depth each time.

Heavy duty rotary tiller When used in conjunction with a tractor with a split hydraulic suspension mechanism, the steps and precautions for the suspension mechanism are used to place the dispenser handle in a "floating" position when the heavy rotary tiller is at an appropriate depth. When the heavy rotary tiller is lowered, the "pressure drop" position can not be used to avoid damage to the heavy rotary tiller. When the heavy rotary tiller is lowered or raised, the handle should be quickly pulled to float Or raise the position, do not stay in the "pressure drop" and "neutral" positions.


  • Heavy Duty 86hp ,87hp ,88hp, 89hp,90 Hp Rotary Tiller Machine
  • Heavy Duty Agricultural Equipment 72hp, 73hp, 74hp, 75hp,76 Hp Rotary Tiller
  • Medium Duty 54hp,55hp,56 Hp ,54 Blades Rotary Tiller, Rotovator
  • Medium Type 3-point 42hp ,43hp, 44 Hp , 36 Blades Rotary Tiller
  • Medium Power Farm 39hp, 40hp, 41 Hp ,tractor-mounted Tillers
  • Tractor Mounted 33hp,34hp,35 Hp Rotary Tiller for Agriculture,side Drive Rotary Tiller

Related Products